![](https://ae01.alicdn.com/kf/S9d11253039fa4084a2c03bae51c160cdF.jpg)
Features:
1. This module supports PD/QC protocol and supports up to 100w power.
2. The voltage can be adjusted freely through the DIP switch, 5V/9V/12V/15/20V is adjustable, and the voltage output voltage is up to 20V.
3. It can automatically lower the voltage according to the power supply voltage output capability.
4. High current, multi-protocol, anti-static protection.
5. It can pass 5A current. The actual output current is determined by the power supply and the load. The input and output of the decoder are straight-through.
Product parameters:
Interface: TYPE-C
Input: 4-21V
Protocol: Support PD, QC protocol (PD > QC)
Voltage: Support 5V/9V/12V/15/20V voltage
Current: 5A (maximum)
Power: supports 100W (requires emark charging cable (agreement stipulated))
Size: 25.7mm*11mm
Product Description:
According to the power supply voltage output capability, the voltage can be automatically reduced (the 20V decoy device can successfully deceive a power supply with a maximum output of 12V to output 12V). This function is applicable to the PD protocol, and the power supply of other protocols is determined.
5A current can pass through the line. The actual output current is determined by your power supply and load. The input and output of the decoy are straight-through.
Instructions for use:
Set the voltage of the DIP switch according to the arrow in the table on the board (dial up)
For example, for 9V, you only need to turn (in the direction of the arrow) the switch near port C.
Supports 100W power, requires emark charging cable (provisions in the agreement)
Product List:
1X decoy (soldering terminals/non-soldering terminals optional)