Product introduction:
At present, many EPROM chips of mainboard, routing, set-top box, LCD, game console,etc. are encapsulated by SOP8 / 16 and 8 / 16 pins and welded on the circuit board.Toburn and update, it is necessary to remove the chip and burn it on the burner, and buythe corresponding burning base, which is very troublesome.And it is easy to damagethe chip when removing the chip. Even if it is removed and burned, it must be weldedto the motherboard.In this way, the high temperature welding back and forth is easyto damage the chip or the burned data is lost and damaged the motherboard again.
Chip test clip burning clip 8p straight needle
Foot position: 8
Features:
no need to disassemble the chip, clamp the lC for burningApplicable package: sop8 pin spacing 1.27mm
Product usage: the burning clip upgrades and burns the lC chip of sop8
Note: this recording clip cannot be directly connected to DuPont wire, so it needs to bewelded by itself
Chip test clip burning clip 8p curved needle
The spring needle is stamped with imported beryllium copper high-precision die, thehead shape imitates the probe design, and is hardened and thickened with copperplating in the later stage, so as to ensure the stability and durability of the product; Atpresent, the connection of the old clip on the market adopts the welding method toconnect with the clip PN pin. In the process of use, the lead is easy to break, falsewelding, broken wire and inconvenient replacement.The new clip can be plugged inand out directly, and the maintenance is convenient and fast .
Chip test clip burning clip 16p straight needleFoot position: 16
Model:
SOP16 quick clip
Features: no need to disassemble the chip, clamp the lC for burningApplicable package: SOP16 pin spacing 1.27mm
Product usage: the burning clip upgrades and burns the lC chip of SOP16
Note:
this recording clip cannot be directly connected to DuPont wire, so it needs to bewelded by itself
Chip test clip burning clip 16p curved needle
The spring needle is stamped with imported beryllium copper high-precision die, thehead shape imitates the probe design, and is hardened and thickened with copperplating in the later stage, so as to ensure the stability and durability of the product; Atpresent, the connection of the old clip on the market adopts the welding method toconnect with the clip PN pin. In the process of use, the lead is easy to break, falsewelding, broken wire and inconvenient replacement. The new clip can be plugged in and out directly, and the maintenance is convenient and fast.
Correct lC schematic:
![](https://ae01.alicdn.com/kf/Se6d5b81b52934da5ba47b9a4d2a4499dh.jpg)
![](https://ae01.alicdn.com/kf/Sf1fa5ed2fa5d463987043be66b7d0597o.jpg)
![](https://ae01.alicdn.com/kf/S38135862fd0e42a49e6c8c4468086565N.jpg)
![](https://ae01.alicdn.com/kf/S4465022f43ca4763b0a1ab393f362d8cn.jpg)
![](https://ae01.alicdn.com/kf/Sdc7c4adc38484d1d80e3e8326c3ab15bN.jpg)