POV Shooting
The Best Stand for POV Shooting. It`s like shooting with your own eyes.
Five Way Adjustment
It is composed of 4 long and short links connected. Each joint rotates 180 degrees. Meet the shooting requirements of various angles.
Double Sided Viscose
Adhesive installation. Industrial-strength waterproof rubber pad to help you mount the camera on your helmet.
(Note: Do not use immediately after sticking, press for 4 hours before use, the longer the pressing time, the stronger the sticking force.)
Curved Surface Fits Better
The base in contact with the helmet face is curved. It can fit better with the helmet. Enlarge the contact area for more stable use.
Easy to Install and Remove
The base and bracket are designed with quick release, one plug and play, and the installation are more convenient.
Multifunctional Wrench
One side is used to screw the action camera screws. The other side is used to screw the helmet accessories.
Super Load Bearing
Stable center of gravity. Carrying a weight of 5kg is still unshakable.
Safety Buckle Protection
After fixing the camera, install a silicone buckle on the other side to provide double protection.
(After installing the helmet accessories. Be sure to attach the safety buckle. Keep the safety buckle as tight as possible. Failure to install it may cause the risk of component breakage or falling.)
Any Installation Location
Install anywhere you want. The base can be connected directly to the camera.
(When the fixed stand is installed, you must pay attention to the base tilting down so that the camera does not obstruct your view. You can adjust the position and install the sticker first.)